Controls & Switches

Pressure Switches

DB 10
Dryer boost switch. Automatic pressure switch allows for fully automatic operation of dryer booster fan. Fan runs for 10 minutes when positive pressure is sensed in the duct line then shuts off and turns on again as needed. Switch suitable for 115 volt supply. 2 amp rating.
UPC #12010

FPS 10
Pressure switch. Adjustable between .05″ to 1.0″ water differential pressure. Using either positive or negative pressure sensing for duct line. Switch suitable for 115 volt supply. 10 amp rating.
UPC #12012

Back to Top

Variable Speed Controllers

SCD Series
Slide type variable speed controller with on/off switch. White Decora-style switch plate and screws included. Fits standard single gang box.

Note: Model SCD 7 protrudes 5/8-inch from wall.

WC Series
WC15 and WC25 (2 wire) rotary type variable speed controller with on/off switch. Brushed aluminum switch plate and screws included. Fits standard single gang box. WC15H (4 wire) contains all the features as the WC15 with a high speed bypass.

RPE Series
Heavy duty rotary type variable speed controller with on/off switch. Brushed aluminum switch plate and screws included.

Back to Top

Timers

FD 60EM
Electronic push button timer. Select from 10, 20, 30 and 60 minute timed operation of fan. Fits standard single gang box. Ideal for multiple switching locations. (switch plate not included)
Switch suitable for 115 volt supply. 20 amp rating.
UPC #73200

FLD 60
Designed as a replacement for the bathroom fan and light switch. By using a microprocessor to monitor and control fan operation, a precise amount of ventilation can be provided. Allows continuous operation of the fan for up to 1 hour after light switch is turned off.
UPC #73060

• Make standard bath fans ASH RAE 62.2 compliant
• Microprocessor technology provides precise ventilation times.
• Fan runs every hour for set ventilation, less any manual and delay operation.
• Excess manual and/or delay operation is subtracted from next hours ventilation time.
• Great for – Meeting ventilation codes, Reducing Mold, Mildew & Pollutants, Saving energy and you money!
• Enables use of energy efficient CFL s in the bathroom.

EDF1
Triple Function Wall Control

• Press button once for continuous low speed
• Press button twice and the unit will cycle 20 minutes ON/40 minutes OFF and repeat
• Press button a third time and the system will run continuously on high speed
• Use in one central location

Humidistat Controller

FH 20
Wall mounted dehumidistat. Adjustable between 20% and 80% relative humidity. Switch suitable for up to 115 volt supply. 7.5 amp rating. White.
UPC #73020

Back to Top

Attic Thermostat

FAT 10
Thermostat for use with attic ventilation systems. Adjustable between 80º and 130º F. Switch suitable for 115 volt supply. 10 amp rating.
UPC #29110

Back to Top

Air Screen Controllers

AS DS
Cast metal and plastic plunger style door switch. Switch suitable 115 or 230 volt supply. 15 amp rating. Designed for use with Fantech Air Screens AC-3600 through AS-6012.
UPC #29101

AS TS
Two-stage thermostat for heated Air Screens. Switch suitable for 115 or 230 volt supply. 7 amp rating.
UPC #29105

Back to Top

HRV/ERV Controls

ECO-Touch
Programmable Touch Screen Wall Control

• ECO-friendly, Simple & Sleek, Quick Install
• Indoor temperature display (Fahrenheit or Celsius)
• Preferences for desired indoor relative humidity
• 2 x 3 inch (5.08 cm x 7.62 cm) LCD backlit touch screen
• Ventilation movement is displayed on screen
• Indoor relative humidity display
• No battery to replace
• Maintenance reminder indicator
• All programmable settings are retained during power outages
• Error code messages reduce troubleshooting time

ECO-Touch Downloads

RTS2
Pushbutton Timer

• 20-Minute Timer with LED Light
• Boosts system to high speed with the touch of a button
• Up to five can be used with one system
• Use in bathrooms, kitchens, laundry

UPC #13462

RTS3
Pushbutton Timer

• 20-40-60 Min. Boost Timer
• Press button once to energize system to high speed for 20 minutes
• Press button twice, unit will run for 40 minutes on high speed
• Press button three times for 60 minutes of high speed
• Up to five can be used with one system

Back to Top

Dehumidistats

MDEH1
Dehumidistat

• Rotary Dial Dehumidistat
• Just turn dial to set desired humidity level
• Multiple units can be used
• Install in bathrooms, kitchen, and laundry
• Dehumidifies when air outside is dryer than air inside

UPC #13474

MDEH2
Dehumidistat

• Dial lights up when dehumidistat turns unit to high speed
• Use one per system
• On/off slider switch
• (Do not use with EDF5)
• Dehumidifies when air outside is dryer than air inside

UPC #13476

MPG 05
Magnehelic Pressure Gauge
Magnehelic Pressure Gauge for measuring and balancing airflow. (0.50″/2000-OD). Shown here with optional accessories. For a complete list of available accessories see the Fantech Price List.
UPC #23096

Back to Top